EnglishThe revolutionary Messerschmitt Me262 was the first jet powered plane to see service. The construction of pre-production aircraft designated Me262 A-0 started in April 1944 but the fighter production version that should have been the first version to be mass-produced was delayed because of Hitler\'s strict contrary orders prioritizing the deployment of fighter/bomber A-2a version. Then, in November 1944, the Me262 A-1a fighter version was finally put into production. It was equipped with four 30mm cannons in the nose to counter Allied bombers and escorting fighters. Late production planes were equipped with hooks under the nose to mount rocket launchers and with 24 R4M air-to-air rocket under the wings making the Me262 the most feared German fighter by Allied pilots.
Tamiya presents the plastic assembly kit of the Messerschmitt Me262 that was used by the Luftwaffe during the closing days of WWII. 1/48 Scale, Overall Length: 221mm, Overall Width: 264mm. The unique form of the Me262 with its engine nacelles under each wing has been accurately replicated. The 4 X 30mm cannon mounted in the nose and cockpit have been reproduced down to the finest details. Canopy and gun bay access panels can be mounted in either open or closed position. R4M air-to-air rockets with launchers to be mounted under the wings and W.Gr 21 air-to-air rocket-launchers to be assembled under the nose are part of the kit. Nose wheel well comes as a die-cast weight. A pilot figure and decals for 4 different markings are included in the kit.
Categories
- Airbrushes - (2)
- Batteries - (88)
- Bearings - (90)
- Bodies & Wings - (419)
- Building Materials - (2)
- Chargers - (33)
- Connectors, Adapters & Wire - (40)
- Damaged Box Items - (1)
- Diecast - (18)
- Display Cases and Stands - (2)
- Drag Race - (103)
- Electronics - (35)
- Engines & Fuel - (114)
- Fasteners & Hardware - (360)
- Gears & Pinions - (453)
- Glue & Tape - (32)
- Model Rockets
- Motors & ESC\'s - (104)
- Paint & Supplies - (137)
- Parts - (3776)
- Plastic Models - (526)
- Pre-Built Models
- Promotional - (21)
- Propellers
- R/C Boats - (12)
- R/C Cars & Trucks - (270)
- R/C Construction
- R/C Drones - (4)
- R/C Scale Accessories - (398)
- Servos - (114)
- Shocks - (401)
- Signs
- Slot Cars
- Specialty/Craft Hobbies
- Tires & Wheels - (746)
- Tools & Maintenance - (280)
- Transmitter & Receiver - (45)
- Wooden Models - (82)
1/48 Messerschmitt Me262 A-1A Model Kit
MESSERSCHMITT ME262 A-1A
DESCRIPTION
$46.99
F-35B Lightning II 1/72 Scale June-24
1/72 LOCKHEED MARTIN F-35 B
DESCRIPTION
This model kit recreates the state-of-the-art F-35B Lightning II in easy to manage and display 1/72 scale. It inherits many of the detailed features first seen in our 1/48 scale release. Thanks to extensive research of the full-size subject, the B variant of the Lockheed Martin F-35 Lightning II model is poised to be the definitive model in 1/72 scale!
About the F-35B Lightning II
Developed under the Joint Strike Fighter (JSF) program , the F-35 integrates multiple functions into its design and there are three types: the F-35A conventional takeoff and landing (CTOL) aircraft, the F-35B short takeoff, vertical landing (STOVL), and the F-35C carrier takeoff and landing (CV). The F-35B was developed as a successor of the AV- 8B Harrier II. The F-35B is recognized as the aircraft which accomplished both supersonic flight and STOVL by the 3-bearing engine duct nozzle and lift fan, and following the F-35A, the F-35B deployment started in 2015. The first F-35B to see action was an aircraft belonging to the U.S. Marine Corps VMFA-211 “Wake Island Avengers†in Afghanistan, in September 2018. Not only the U.S. and the U.K. but also Italy employs the F-35B. The Japan Air Self-Defense Force also plans to launch a new fighter squadron with the F-35B from 2024 onward. As the F-35B can be operated from both aircraft carriers and airfields featuring short runways, many countries are considering its deployment, and the F-35B looks set to become a significant presence in the skies across the world.
• 1/72 scale plastic model assembly kit. Wingspan: 148mm, fuselage length: 215mm.
• The kit recreates the vertical landing and can be assembled in two ways; landed or hovering and ensures superior assembly with dedicated angled door parts.
• The parts faithfully depict a hovering aircraft with downward engine nozzle and opened doors.
• Features realistic renderings of half-open two inner weapon bay doors and interior details such as ribs and pipes.
• The nose landing gear and main landing gear can be depicted as extended (for hovering) or retracted (for landing).
• The lift fan is integrated with nose landing gear bay, and the variable vane underneath is recreated in detail.
• Shorter than on the F-35A, the engine nozzle is recreated by a single part.
• The 3BSM (3 Bearing Swivel Module) is faithfully recreated with a dedicated parts breakdown for this kit.
• RAM (Radar Absorbent Material) are molded into fuselage surfaces.
• Clear parts recreate canopy and EOTS fairing under the nose.
• Includes parts for AIM-9X Sidewinder x2 and AIM-120C AMRAAM x2.
• Y-shaped air intake duct for highly advanced stealth characteristics.
• Detailed cockpit, landing gear bays and roll posts.
• Martin-Baker US16E ejection seat.
• RCS (radar cross section) enhancers affixed to top and bottom sections during basic training exercises.
• One pilot figure with the helmet mounted display (HMD).
• A stand is included to use if you are making a hovering model.
• Comes with 5 marking options from a total of three countries (United States Marine Corps, Royal Air Force, Italian Navy).
• Includes masking stickers and a painting guide.
$69.99